How to Sight In a Night Vision Scope – Guide For You

Until recently, “night operations” and night vision technology were only a cinematic fad.

In fact, night vision scope (NVDs) have existed for a long time, but were so rare that most people did not even know about them.

Fortunately, technological progress always makes technology cheaper and transforms it from “the pride of the elite” into something accessible to most people. How to sight in a night vision scope? So night vision scope has become commercially available at reasonable prices.

Note that “reasonable prices” are far from low prices. While it is possible to find glasses for $250, they are more for showing off in the backyard of your house in front of your friends. Any night vision scope that can be recommended to those who work with firearms must meet high quality standards. Take, for example, the company TNVC (Tactical Night Vision Companion).

As the name implies, they produce all types and variants of night vision scopes (and not only), and are working mostly on military orders. Ho recently they have been doing a lot of work to bring their products to a broader market. And not just products, but courses on how to use them.

The NTVC Nigth Fighter course has two versions: Night Fighter Level 1 and Night Fighter Armed Professional. The second option covers all the material of the first, with the addition of some features, such as “Command CQB”.

And while the basic version of the course can be taken by anyone, the advanced version is only for law enforcement officers and those who have a certain level of security clearance. It’s all held at the Alliance Training Center in Ohio.

How to Sight In a Night Vision Scope: Preparing to Shoot a Gun

There are a few important things to pay attention to before you shoot night vision scopes.

  • First, you need to adjust the sharpness of the reticle according to the instructions that are in each rifle scope package. Here it is important to consider that the longer you look through the reticle, the better its sharpness, so it is better to look through the eyepiece at short intervals.
  • Next, properly prepare lens cap and the sighting distance. A distance of 100 meters is considered ideal for almost all guns, except for small-caliber rifles and smoothbore rifles – 50 meters for them. The target must be clean and large, at least 0.5 x 0.5 meters.

It is better to mount the rifle on a stationary base – a targeting machine.

how to sight in a night vision scope

Next, adjust the lens cap of the rifle to the target, which you still need to be able to hit. For this purpose, we look at the target through the barrel: the square of the target should be clearly visible through the barrel’s bore. Then we bring the crosshairs of the telescopic sight to the target, using correction barrels. You will quickly guess where to turn them yourself, but as a result of the settings, the crosshairs and the barrel should look at the target together.

If your rifle is securely mounted on a sighting machine or you have a steady hand, there’s no need for math, calculations, or even a sighting reticle. Here’s how it works:

  • Open lens cap, take aim, take a shot, and see where the hole turns out to be.
  • Hold the gun at the point of aim without moving it sideways. We hope your hand does not shake!

Now your task is to move the crosshairs of the optics to the hole. To do this, spin the reels so that the reticle moves first horizontally and then vertically. As a result, the crosshairs should be on the cork hole.

Night Operations: How to Sight In a Night Vision Scope

It is always useful to find the best experts in the field of knowledge you are trying to comprehend. In this case, such experts are the consultants of the courses described above, veterans, former law enforcement officers and military personnel who have experience using night vision devices in real combat situations.how to sight in a night vision scope

Know Your Surroundings

It doesn’t matter how to sight in a night vision scope if you use a night vision device with two eyes or one eye, your field of effective vision is still only 17 degrees. And that means you’ll finally realize how important peripheral vision is to you.

So the main point to remember is “Turn your head.”  If you’re not looking under your feet, you don’t know what’s there. If you’re not aiming straight at the target, you can’t see it. So you have to actively stretch your neck.

In addition to the reduced field of view, the night vision scopes also severely limits depth perception. The lenses in the instrument and the monochrome green color seriously interfere with distance perception. Collisions with doorframes and doors are often encountered by novice night vision scope device users, but this is purely a question of practice.

NTVC trainers suggested playing a ball by throwing it to each other in the dark while wearing a NVR. This restores the coordination needed to open and close doors, change magazines and troubleshoot shooting. By the way, there are more dangerous things than trying to shove a full magazine past a magwell.

In addition, the technique “from large to small” will also help you to orient in space. First find the door, then the door frame, and then the door handle. A very simple method that helps add touch to impaired spatial perception.

Know Your Gear

Even before you buy night vision scopes unit, you need to learn how to sight in a night vision scope and navigate your gear. You have to know where everything is and be able to use it blindly. Guns, grenades, spare magazines – everything that might be useful in real combat but that you would not be able to see while wearing the NVR.

Be sure to distribute your gear wisely – TNVC instructors have created a whole series of instructions on how to properly configure your weapons and gear for use with a UAV. This includes even the smallest of things, such as the EOD elements for marking “cleared” areas and flexible handcuffs for securing detainees.

The main thing that matters is consistency and ease of access. The things that you will need for sure should be closest and always in a well-defined place. And if in usual life with keys, a lighter and a wallet usually there is no problem, but in night operations with a first-aid kit and spare magazines – very much possible.

Therefore – simply start to train with eyes closed. If in this state you will have no problem with velcro, zippers and other things, everything is fine. If not, the equipment will have to be revised.

The same applies to weapons (only the carbine was considered in the NTVC course, but the principle is applicable to any weapon). Especially if the weapon is equipped with an LCD and a flashlight – do you use two separate switches? And will you be able to unmistakably and intuitively turn on the right device, even under stress?

If not, you’ll have to change some things. It’s a good idea to equip your weapon with a vertical tactical grip or hand rest so that your hand always holds the weapon in the same place. And in its immediate vicinity you should place the switches and devices. See more in the video below.

Useful Information: TOP 10 Best Night Vision Scopes

In this video you will see the best night vision scopes. This is what separates predators from prey, to up your game, you need the best night vision scope!

Know Your Limitations

A night vision scope, alas, does not turn darkness into light. There are some physical and technological limitations that must be considered. One of the main ones is the use of scopes and optics. Shooting a pistol with conventional mechanical sights through an NVR will become impossible.

That is why we saw on the course a lot of guns with collimators. The advantages of “red dot” when working with night vision devices become evident after only a few minutes of training. There are a couple of variants of IR-LCU for pistols, but collimators are still more convenient.

As for the carbines, there are several options and configurations for “night operations”. The military, for example, installs an IR laser on the carbine, which is the simplest solution, although one of the most expensive.

As an example, take the MAWL C1+. A terrific device, if it were not for one thing – the price of $2500. And that is without the cost of the gun. It is also possible to use other sighting systems with night vision support, such as Aimpoint or EOTech, which have special adjustments for IR range. But because of the impossibility of normal tab and sighting line it is still uncomfortable, and the field of view is limited even more.

In addition, it is worth giving preference to those UAVs that can switch between infrared and conventional light. Yes, it’s a bit redundant, but when your $Z,000 device runs out of batteries at the most inopportune moment, it will come in handy. This also applies to the IR laser and flashlight – they too should switch between IR and regular light. Just in case.

Also you can use a thermal scope.The principle of operation of a night vision sight enables it to be used even on a day when it is much easier to see the target for zeroing. But what about a thermal scope? If you use a thermal scope you should learn how to sight in a thermal scope.

Night Operations

Night vision scope continues to evolve. In addition to being and still being a serious advantage in nighttime military operations, NVs have become an excellent tool for nighttime hunting. In Western Texaco, for example, hunters can only shoot wild boars, which are active at night and cause damage to crops and livestock.how to sight in a night vision scope

Among other things, shooting with a night vision scope is simply interesting. However, it is not an inexpensive activity, and you should think carefully before deciding to buy the necessary equipment.

If you are one of them, find someone who can give you advice from his own practice on the ESP. Then take the time to adjust your equipment and practice with it in the light. After that, put new batteries in the NVR, smoke a cigar and wait for the sun to set.

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector